Painting Instructions

You Will Need...

  • 220-grit Sandpaper
  • Dish Detergent
  • Hot Water
  • Clean Rags
  • PVC Safe Primer/Sealer
  • Acrylic Paint
  • Brush, Roller, or Spray Gun

Step 1

Wipe down the product with hot water and a small amount of dish soap. Then dry with a new clean rag.

Step 2

Lightly sand the smooth areas with 220-grit sandpaper, then repeat step 1 to get all loose particles off the product.

Step 3

Apply 1-2 coats of PVC safe primer/sealer. You can apply with a brush, roller, or air gun. We recommend using an air gun for both painting and priming, but brushing will work too.

Step 4

Apply 1-2 coats of acrylic paint to the product. Make sure to apply evenly. It is easiest to use a spray gun and the finish should come out a lot nicer too. Let dry for a day then follow our provided installation instructions.

This is only for our products made from PVC (Shutters, trim, and brackets). Unfortunately, HDPE cannot be painted.

Make sure to paint in a well ventilated area. We also recommend using a face mask to prevent from inhaling any harmful fumes.

Disclaimer: These are the steps that have the best outcome in our opinion. We are not responsible for the final outcome and once you start this process the items become non-returnable.